You may see dirt on the towelette – this is normal. Step 2. Using a REVO wipe or soft cloth towel with a reasonable amount of Isopropyl Alcohol (90%), work up and down the shaft, from the joint end toward the tip while rotating your hand around the shaft’s circumference. Step 1. Wipe the shaft with the included microfiber cleaning cloth, brushing away any lose dirt, dust and debris. To clean the surface of your REVO carbon composite shaft, you can use one of the following two solutions: REVO Wipes, or Isopropyl Alcohol (90%) cleaning. Never use talcum powder, baby powder, hand chalk, or other shaft treatments on a REVO carbon fiber composite shaft. Any sanding, polishing, or treatment of the surface of the shaft with chemicals or abrasives of any kind will void the shaft’s limited-lifetime warranty and negatively affect the shaft’s longevity and performance. Sanding the surface of the REVO shaft will damage the exterior finish and weaken the shaft’s structural integrity and release potentially harmful materials that could affect your health. REVO carbon composite shafts should never be sanded or modified. We recommend protecting your shaft with a case and joint protectors. They should not be bent excessively, hit on the table or other objects, or treated with any abrasives, solid or liquid. REVO carbon composite shafts are not designed to withstand extensive lateral pressure. REVO carbon composite shafts feature a limited-lifetime warranty against warpage.ĪBUSE. 010” (0.25mm) will void the shaft’s limited-lifetime warranty and compromise its performance. Any reduction in the R-Break Shield below. 010” (0.25mm) thick to maintain the shaft’s integrity. In the event that you choose to replace the tip on your shaft through a non-authorized cue technician, the gray R-Break Shield must remain at least. Because the shaft cannot be sanded, replacing the tip, and/or the R-Break Shield should only be done by an authorized Predator Repair Center equipped with the proper tools to protect your REVO shaft. The front end is made up of the Predator V-TEK vault plate, gray R-Break Shield, and seven-layer BK Hybrid Tip. REVO BK-R Carbon composite shafts have no ferrule. REVO CARBON COMPOSITE BREAK SHAFTS (BK-R) In the event that you choose to replace the tip on your shaft through a non-authorized cue technician, the red V-TEK Tip-Silencer must remain at least. Because the shaft cannot be sanded, replacing the tip, and/or the tip silencer should only be done by an authorized Predator Repair Center equipped with the proper tools to protect your REVO shaft. The front end is made up of the Predator V-TEK vault plate, red V-TEK Tip Silencer, and eight-layer Victory Tip. REVO Carbon composite shafts have no ferrule. REVO 12.4 & 12.9 PLAYING SHAFT TIP REPLACEMENT.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |